How a Water Meters and Water Bill Can Lower Your Energy Bill

Water Meters and Water Bill Can Lower Your Energy Bill

There are many possible issues inherent in water consumption, use, and metering which can greatly affect your water usage and water costs. These issues primarily revolve around high water flow rates (high PSI), low flow rates (low GPM), and increased turbulence. Other issues come into play such as the efficiency with which the system pumps water through the plants. All of these issues and more need to be taken into consideration during the design of any new plant. This is why any installation company worth their salt will include proper research and analysis data when they are rendering a quote on a proposed installation.

One of the first issues to take into consideration during metering

is the PSI tolerance of the equipment. PSI is the maximum water flow rate allowed for the machinery. The lower the PSI tolerance of the equipment, the greater the chances of pumps and pipes overheating and therefore de-energizing the water. If you are using machinery with a high PSI tolerance, you will want to avoid setting your metering to high values. This will help to keep your machinery operating at peak efficiency without causing overheating or hydrostatic situations.

In addition to PSI and GPM

water consumption is also affected by the type of meters used to track the consumption of energy. Meters which use either float type or contact type technology are less prone to inaccurate readings, but both of these types are prone to slippage. It is imperative to purchase these types of metering equipment from a supplier that offers a guaranteed lifetime guarantee on the metering supplies.

To properly meter your plants

you must also determine the frequency with which you will be monitoring the consumption of energy. If you are monitoring the water flow of your plant using a float or contact type meter, you should set the frequency to match the demand for energy consumption. To ensure that your water meter can display accurate data, you must only measure the amount of water flowing through the plant on an annual basis. While this can be an inconvenience for most gardeners, it will be most important to ensure that the energy consumption data collected is correct.

There are many different types of metering equipment available

to meet your water consumption needs. However, most of these meters fall under one of two primary categories: displacement water meters or ultrasonic water meters. The difference between the two is subtle but important. displacement water meters measure the pressure of the water exerted on the meter, while ultrasonic water meters measure the frequency with which the water flows.

With the proper selection and installation

you can dramatically reduce your water consumption, which will in turn help to lower your overall energy bill. When you compare the amount of energy required to operate a given-sized pond with the amount of water produced by it, you will see that using a water meter saves you both money and time. For example, if you have a pond that produces twenty gallons of water per day, you can expect to use up one thousand six hundred hours and save twenty-two thousand gallons of water. In comparison, operating a less efficient-sized pond would require you to use eight hundred hours and save only three thousand gallons of water.

Leave a Comment

Your email address will not be published. Required fields are marked *